What is the FSCG of the NSN 3110-01-191-3230?

The FSCG of the NSN 3110-01-191-3230 is 3110

Does the NSN 3110-01-191-3230 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105068

Does NSN 3110-01-191-3230 require demilitarization?

"commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Does NSN 3110-01-191-3230 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-191-3230 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-191-3230 was assigned to the Federal Catalog?

It was assigned 40 years ago, on Sun, Oct 7, 1984

T543 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: T543. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: T543
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-01-191-3230
Item Name Code: 30213
Federal Item Identification Guide: A044A0
Assigment Date: 10/07/1984

Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.

90.0 pounds minimum and 110.0 pounds maximum bearing preload rating, mil-l-6085 mil spec single material response lubrication material document and classification, 3.0622 inches minimum and 3.0625 inches maximum bore diameter, 15.0 degrees minimum and 25.0 degrees maximum contact angle, angular load direction

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-01-191-3230 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bearing Preload Rating: 90.0 pounds minimum and 110.0 pounds maximum
Bore Diameter: 3.0622 inches minimum and 3.0625 inches maximum
Contact Angle: 15.0 degrees minimum and 25.0 degrees maximum
Load Direction: angular
Lubrication Material Document And Classification: mil-l-6085 mil spec single material response
Overall Outside Diameter: 3.8746 inches minimum and 3.8750 inches maximum
Overall Width: 0.6040 inches minimum and 0.6240 inches maximum
Material Document And Classification: unable to decode
Material
Material: unable to decode
Retainer Fabrication Method: pressed
Shield Quantity: 2
Special Features: vacuum impregnate retainer with specified oil,centrifuge for 2 minutes at 100 g after vacuum; inscribe match mark on od of each bearing; one shield each bearing
Specification/Standard Data: 82577-901861 manufacturers standard
Standard Tolerance Designation: abec no. 5t
Style Designator: counterbored outer rings, non-separable, back to back mounting
Surface Finish: ground
Lubrication Material: unable to decode

Frequently Asked Questions

Find quick answers to common questions about bearing: T543. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-01-191-3230?: The FSCG of the NSN 3110-01-191-3230 is 3110

Does the NSN 3110-01-191-3230 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105068

Does NSN 3110-01-191-3230 require demilitarization?: "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Does NSN 3110-01-191-3230 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-191-3230 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.