What is the FSCG of the NSN 3110-01-084-2530?

The FSCG of the NSN 3110-01-084-2530 is 3110

Does the NSN 3110-01-084-2530 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-01-084-2530 require demilitarization?

"commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Does NSN 3110-01-084-2530 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-084-2530 was assigned to the Federal Catalog?

It was assigned 45 years ago, on Sat, Oct 13, 1979

5212-J2-100 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: 5212-J2-100. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 5212-J2-100
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-01-084-2530
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 10/13/1979

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

0.0038 inches minimum radial and 0.0046 inches maximum radial and 0.0030 inches nominal axial internal clearance, 1.9940 inches minimum and 1.9990 inches maximum inner ring width, uh-60l/ah-64a engine (t701c) end item identification, straight bore shape, 2.4014 inches minimum and 2.4016 inches maximum bore diameter

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-01-084-2530 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bore Diameter: 2.4014 inches minimum and 2.4016 inches maximum
Bore Shape: straight
End Item Identification: uh-60l/ah-64a engine (t701c)
Inner Ring Width: 1.9940 inches minimum and 1.9990 inches maximum
Internal Clearance: 0.0038 inches minimum radial and 0.0046 inches maximum radial and 0.0030 inches nominal axial
Load Direction: radial
Outer Ring Width: 1.7120 inches minimum and 1.7170 inches maximum
Overall Outside Diameter: 4.0397 inches minimum and 4.0400 inches maximum
Material Document And Classification: ams 6414 assn std single material response retainer
Material Document And Classification: sae 52100 assn std single material response ball
Material Document And Classification: sae 52100 assn std single material response inner ring
Material Document And Classification: sae 52100 assn std single material response outer ring
Material: steel retainer
Material: steel comp e52100 ball
Material: steel comp e52100 inner ring
Material: steel comp e52100 outer ring
Precious Material And Location: retainer silver
Precious Material: silver
Retainer Fabrication Method: machined
Standard Tolerance Designation: abec no.7
Special Features: stabilized for operation from m65 deg f to p800 deg f,c28.0 to c32.0 rockwell hardness retainer
Surface Finish: ground
Test Data Document: 99207-5034t07+03 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Replaces

The NSN 3110-01-084-2530 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3110-01-133-5761	No Name Available	02/01/1996
3110-01-478-6549	No Name Available	08/01/2001

Frequently Asked Questions

Find quick answers to common questions about bearing: 5212-J2-100. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-01-084-2530?: The FSCG of the NSN 3110-01-084-2530 is 3110

Does the NSN 3110-01-084-2530 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-01-084-2530 require demilitarization?: "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Does NSN 3110-01-084-2530 contain precious materials?: Item contains silver.

Does NSN 3110-01-084-2530 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.