What is the FSCG of the NSN 3110-01-041-3676?

The FSCG of the NSN 3110-01-041-3676 is 3110

Does the NSN 3110-01-041-3676 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105068

Does NSN 3110-01-041-3676 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-041-3676 contain precious materials?

Precious metal content is unknown

Does NSN 3110-01-041-3676 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-041-3676 was assigned to the Federal Catalog?

It was assigned 48 years ago, on Mon, May 23, 1977

MM205KPCRDULFS381 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: MM205KPCRDULFS381. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: MM205KPCRDULFS381
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-01-041-3676
Item Name Code: 30213
Federal Item Identification Guide: A044A0
Assigment Date: 05/23/1977

Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.

2.0470 inches minimum and 2.0472 inches maximum overall outside diameter, contact bearing seal type, angular load direction, mil-g-81322 mil spec single material response lubrication material document and classification, 0.9842 inches minimum and 0.9843 inches maximum bore diameter

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-01-041-3676 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bearing Seal Type: contact
Bore Diameter: 0.9842 inches minimum and 0.9843 inches maximum
Load Direction: angular
Lubrication Material Document And Classification: mil-g-81322 mil spec single material response
Overall Outside Diameter: 2.0470 inches minimum and 2.0472 inches maximum
Overall Width: 1.1612 inches minimum and 1.1812 inches maximum
Material Document And Classification: unable to decode
Material: unable to decode
Retainer Fabrication Method: machined
Seal Quantity: 1
Special Features: duplex pair matched back to back; 100 pct dynamic noise tested; 20 pct full of specified lubricant
Standard Tolerance Designation: abec no.7
Style Designator: counterbored outer rings, non-separable, back to back mounting
Surface Finish: ground
Lubrication Material: unable to decode

Frequently Asked Questions

Find quick answers to common questions about bearing: MM205KPCRDULFS381. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-01-041-3676?: The FSCG of the NSN 3110-01-041-3676 is 3110

Does the NSN 3110-01-041-3676 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105068

Does NSN 3110-01-041-3676 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-041-3676 contain precious materials?: Precious metal content is unknown

Does NSN 3110-01-041-3676 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.