What is the FSCG of the NSN 3110-00-925-0400?

The FSCG of the NSN 3110-00-925-0400 is 3110

Does the NSN 3110-00-925-0400 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-925-0400 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-925-0400 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-00-925-0400 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-925-0400 was assigned to the Federal Catalog?

It was assigned 59 years ago, on Mon, Jan 24, 1966

RA008NPPBFS219ANDC0LLAR | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: RA008NPPBFS219ANDC0LLAR. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: RA008NPPBFS219ANDC0LLAR
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-925-0400
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 01/24/1966

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

0.7450 inches minimum and 0.7500 inches maximum inner ring width, straight bore shape, contact bearing seal type, self-aligning alignment type, 0.5000 inches minimum and 0.5005 inches maximum bore diameter

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-925-0400 . Find dimensions, materials, tolerances, performance characteristics, etc.

Alignment Type: self-aligning
Bearing Seal Type: contact
Bore Diameter: 0.5000 inches minimum and 0.5005 inches maximum
Bore Shape: straight
Inner Ring Width: 0.7450 inches minimum and 0.7500 inches maximum
Internal Fit-Up Designation: standard
Load Direction: radial
Lubrication Material: grease
Lubrication Material Document And Classification: alvania 3,fscm 54527 mfr ref single material response
Outer Ring Width: 0.5118 inches nominal
Overall Outside Diameter: 1.5743 inches minimum and 1.5748 inches maximum
Material: rubber synthetic seal
Material: steel ball
Material: steel inner ring
Material: steel outer ring
Material: steel retainer
Retainer Fabrication Method: pressed
Seal Quantity: 2
Self-Alignment Location: external
Special Features: one face of both rings flush,inner ring extends one side; eccentric locking collar on extended side of iner ring
Surface Finish: ground

Frequently Asked Questions

Find quick answers to common questions about bearing: RA008NPPBFS219ANDC0LLAR. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-925-0400?: The FSCG of the NSN 3110-00-925-0400 is 3110

Does the NSN 3110-00-925-0400 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-925-0400 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-925-0400 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-925-0400 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.