What is the FSCG of the NSN 3110-00-801-7007?

The FSCG of the NSN 3110-00-801-7007 is 3110

Does the NSN 3110-00-801-7007 have a Schedule B code assigned?

Yes, the Schedule B code is 8482800080

Does NSN 3110-00-801-7007 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-801-7007 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-801-7007 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-801-7007 was assigned to the Federal Catalog?

It was assigned 63 years ago, on Mon, Jan 1, 1962

REP3F4-4FS210 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: REP3F4-4FS210. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: REP3F4-4FS210
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-801-7007
Item Name Code: 00049
Federal Item Identification Guide: A044A0
Assigment Date: 01/01/1962

A special single or multiple-row ball bearing, rigid or self-aligning, and constructed with either a solid or hollow shank, internally or externally threaded.

rigid alignment type, 0.4370 inches nominal inner ring width, 1.3750 inches nominal length from bore center to shank end, contact bearing seal type, 0.1897 inches minimum and 0.1900 inches maximum bore diameter

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-801-7007 . Find dimensions, materials, tolerances, performance characteristics, etc.

Alignment Type: rigid
Bearing Seal Type: contact
Bore Diameter: 0.1897 inches minimum and 0.1900 inches maximum
Inner Ring Width: 0.4370 inches nominal
Length From Bore Center To Shank End: 1.3750 inches nominal
Lubrication Material Document And Classification: mil-g-23827 mil spec single material response
Lubrication Material: grease
Outer Ring Width: 0.3280 inches nominal
Overall Length: 1.7660 inches nominal
Overall Outside Diameter: 0.7810 inches nominal
Material: rubber synthetic seal
Material: steel ball
Material: steel inner ring
Material: steel outer ring
Material: steel shaft
Nominal Thread Size: 0.250 inches
Seal Quantity: 2
Self-Alignment Angle: 10.00 degrees nominal
Shank Diameter: 0.3750 inches nominal
Shank Style: internally threaded w/bead
Shank Thread Length: 0.7500 inches nominal
Special Features: 0.0700 in. hole drilled thru shank end; heat treated shank 90000 to 150000 psi tensile
Width Across Flats: 0.3650 inches minimum and 0.3770 inches maximum
Style Designator: double row, staggered, ball
Surface Treatment: cadmium all external/exposed metal surfaces
Thread Class: 3b
Thread Direction: right-hand
Thread Quantity Per Inch: 28
Thread Series Designator: unf

Frequently Asked Questions

Find quick answers to common questions about bearing: REP3F4-4FS210. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-801-7007?: The FSCG of the NSN 3110-00-801-7007 is 3110

Does the NSN 3110-00-801-7007 have a Schedule B code assigned?: Yes, the Schedule B code is 8482800080

Does NSN 3110-00-801-7007 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-801-7007 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-801-7007 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.