What is the FSCG of the NSN 3110-00-727-7271?

The FSCG of the NSN 3110-00-727-7271 is 3110

Does the NSN 3110-00-727-7271 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-727-7271 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-727-7271 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-727-7271 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-727-7271 was assigned to the Federal Catalog?

It was assigned 64 years ago, on Sun, Jan 1, 1961

SR8FF3G2 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: SR8FF3G2. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: SR8FF3G2
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-727-7271
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 01/01/1961

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

0.5000 inches nominal bore diameter, contact bearing seal type, radial load direction, 0.0002 inches minimum radial and 0.0004 inches maximum radial internal clearance, straight bore shape

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-727-7271 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bearing Seal Type: contact
Bore Diameter: 0.5000 inches nominal
Bore Shape: straight
Internal Clearance: 0.0002 inches minimum radial and 0.0004 inches maximum radial
Load Direction: radial
Lubrication Material Document And Classification: mil-g-23827 mil spec single material response
Lubrication Material: grease
Overall Outside Diameter: 1.1250 inches nominal
Overall Width: 0.3125 inches nominal
Material: rubber synthetic seal
Material: steel corrosion resisting ball
Material: steel corrosion resisting inner ring
Material: steel corrosion resisting outer ring
Material: steel corrosion resisting retainer
Retainer Fabrication Method: pressed
Seal Quantity: 2
Standard Tolerance Designation: abec no.7
Style Designator: non-loading groove, non-separable
Surface Finish: ground

Replaces

The NSN 3110-00-727-7271 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3110-00-800-8163	No Name Available	12/05/1966
3110-00-954-1451	No Name Available	03/03/1967

Frequently Asked Questions

Find quick answers to common questions about bearing: SR8FF3G2. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-727-7271?: The FSCG of the NSN 3110-00-727-7271 is 3110

Does the NSN 3110-00-727-7271 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-727-7271 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-727-7271 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-727-7271 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.