What is the FSCG of the NSN 3110-00-725-2511?

The FSCG of the NSN 3110-00-725-2511 is 3110

Does the NSN 3110-00-725-2511 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-725-2511 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-725-2511 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-725-2511 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-725-2511 was assigned to the Federal Catalog?

It was assigned 64 years ago, on Sun, Jan 1, 1961

R3SSZAX306-0-11 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: R3SSZAX306-0-11. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: R3SSZAX306-0-11
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-725-2511
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 01/01/1961

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

0.0000 inches minimum radial and 0.0003 inches maximum radial internal clearance, tight internal fit-up designation, 0.1875 inches nominal bore diameter, 16.5 degrees nominal contact angle, straight bore shape

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-725-2511 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bore Diameter: 0.1875 inches nominal
Bore Shape: straight
Contact Angle: 16.5 degrees nominal
Internal Clearance: 0.0000 inches minimum radial and 0.0003 inches maximum radial
Internal Fit-Up Designation: tight
Internal Fit-Up Contact Angular Direction: inward convergent
Load Direction: angular
Lubrication Material Document And Classification: mil-l-6085 mil spec single material response
Lubrication Material: oil
Overall Outside Diameter: 0.5000 inches nominal
Overall Width: 0.1562 inches nominal
Material: steel ball
Material: steel corrosion resisting retainer
Material: steel corrosion resisting shield
Material: steel inner ring
Material: steel outer ring
Retainer Fabrication Method: coiled
Shield Quantity: 2
Special Features: internal clearance measured under a 1/2 lb reversing load; spring seperators,shields and wires of 302 stainless steel; other special features
Standard Tolerance Designation: abec no.7
Style Designator: non-loading groove, non-separable
Surface Finish: ground

Replaces

The NSN 3110-00-725-2511 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3110-00-006-6621	No Name Available	04/01/1974
3110-00-902-1041	No Name Available	11/01/2013

Frequently Asked Questions

Find quick answers to common questions about bearing: R3SSZAX306-0-11. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-725-2511?: The FSCG of the NSN 3110-00-725-2511 is 3110

Does the NSN 3110-00-725-2511 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-725-2511 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-725-2511 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-725-2511 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.