What is the FSCG of the NSN 3110-00-716-5183?

The FSCG of the NSN 3110-00-716-5183 is 3110

Does the NSN 3110-00-716-5183 have a Schedule B code assigned?

Yes, the Schedule B code is 8482400000

Does NSN 3110-00-716-5183 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-716-5183 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-716-5183 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-716-5183 was assigned to the Federal Catalog?

It was assigned 53 years ago, on Sun, Jul 11, 1971

CTA21XCCP | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: CTA21XCCP. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: CTA21XCCP
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-716-5183
Item Name Code: 00040
Federal Item Identification Guide: A044A0
Assigment Date: 07/11/1971

An assembly consisting of a roller and stud used to effect a rolling contact with a cam, and convert the reciprocating or oscillating motion to linear motion.

mil-g-23827 mil spec single material response lubrication material document and classification, grease lubrication material, contact bearing seal type, 0.4950 inches minimum and 0.5000 inches maximum outer ring width, 1.4062 inches nominal overall length

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-716-5183 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bearing Seal Type: contact
Lubrication Material Document And Classification: mil-g-23827 mil spec single material response
Lubrication Material: grease
Outer Ring Width: 0.4950 inches minimum and 0.5000 inches maximum
Overall Length: 1.4062 inches nominal
Overall Outside Diameter: 0.7500 inches minimum and 0.7515 inches maximum
Material: plastic seal
Material: steel comp e52100 outer ring
Material: steel comp e52100 roller
Material: steel comp e52100 stud
Nominal Thread Size: 0.375 inches
Seal Quantity: 2
Stud Diameter: 0.3755 inches minimum and 0.3770 inches maximum
Stud Length: 0.8750 inches nominal
Style Designator: cam follower
Surface Treatment: cadmium stud
Surface Treatment: chromium outer ring
Thread Class: 2a
Thread Direction: right-hand
Thread Length: 0.3750 inches nominal
Thread Quantity Per Inch: 24
Thread Series Designator: unf

Replaces

The NSN 3110-00-716-5183 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3110-00-434-4491	No Name Available	07/01/1985

Frequently Asked Questions

Find quick answers to common questions about bearing: CTA21XCCP. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-716-5183?: The FSCG of the NSN 3110-00-716-5183 is 3110

Does the NSN 3110-00-716-5183 have a Schedule B code assigned?: Yes, the Schedule B code is 8482400000

Does NSN 3110-00-716-5183 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-716-5183 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-716-5183 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.