What is the FSCG of the NSN 3110-00-498-6992?

The FSCG of the NSN 3110-00-498-6992 is 3110

Does the NSN 3110-00-498-6992 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-498-6992 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-498-6992 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-498-6992 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-498-6992 was assigned to the Federal Catalog?

It was assigned 55 years ago, on Fri, Oct 17, 1969

SS6632FCK6 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: SS6632FCK6. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: SS6632FCK6
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-498-6992
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 10/17/1969

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

straight bore shape, 0.0005 inches minimum radial and 0.0008 inches maximum radial internal clearance, 0.0230 inches nominal flange width, 0.4220 inches nominal flange outside diameter, 0.1875 inches nominal bore diameter

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-498-6992 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bore Diameter: 0.1875 inches nominal
Bore Shape: straight
Flange Outside Diameter: 0.4220 inches nominal
Flange Width: 0.0230 inches nominal
Internal Clearance: 0.0005 inches minimum radial and 0.0008 inches maximum radial
Load Direction: radial
Outer Ring Outside Diameter: 0.3750 inches nominal
Overall Width: 0.1250 inches nominal
Material: steel corrosion resisting overall
Special Features: 57.5 percent race curvature also 1500 mg-mm peak torque undr 75 gm thrust load also test at 600 rpm with dwell not exceed 3,under std torque test
Retainer Fabrication Method: pressed
Standard Tolerance Designation: abec no.5
Style Designator: non-loading groove, non-separable
Surface Finish: ground

Replaces

The NSN 3110-00-498-6992 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3110-00-799-0368	No Name Available	11/01/1980

Frequently Asked Questions

Find quick answers to common questions about bearing: SS6632FCK6. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-498-6992?: The FSCG of the NSN 3110-00-498-6992 is 3110

Does the NSN 3110-00-498-6992 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-498-6992 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-498-6992 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-498-6992 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.