What is the FSCG of the NSN 3110-00-425-1801?

The FSCG of the NSN 3110-00-425-1801 is 3110

Does the NSN 3110-00-425-1801 have a Schedule B code assigned?

Yes, the Schedule B code is 8482400000

Does NSN 3110-00-425-1801 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-425-1801 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-00-425-1801 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-425-1801 was assigned to the Federal Catalog?

It was assigned 51 years ago, on Sat, May 4, 1974

DB-50426 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: DB-50426. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: DB-50426
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-425-1801
Item Name Code: 00051
Federal Item Identification Guide: A044A0
Assigment Date: 05/04/1974

A single or multiple-row antifriction bearing used with or without inner or outer races characterized by relatively small size rollers usually not ranging above 0.250 inch (6.35mm) diameter and generally longer in length in relation to diameter.

rigid alignment type, sri,fscm 99252 mfr ref single material response lubrication material document and classification, contact bearing seal type, grease lubrication material, 0.6694 inches minimum and 0.6699 inches maximum bore diameter

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-425-1801 . Find dimensions, materials, tolerances, performance characteristics, etc.

Alignment Type: rigid
Bearing Seal Type: contact
Bore Diameter: 0.6694 inches minimum and 0.6699 inches maximum
Lubrication Material Document And Classification: sri,fscm 99252 mfr ref single material response
Lubrication Material: grease
Overall Outside Diameter: 0.9370 inches minimum and 0.9380 inches maximum
Overall Width: 0.6800 inches minimum and 0.6900 inches maximum
Material: plastic retainer
Material: rubber synthetic seal
Material: steel outer ring
Material: steel roller
Retainer Fabrication Method: pressed
Seal Quantity: 1
Style Designator: non-separable, with roller retainer, closed end, drawn shell
Surface Finish: ground

Replaces

The NSN 3110-00-425-1801 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3110-01-149-5263	No Name Available	01/01/1992

Frequently Asked Questions

Find quick answers to common questions about bearing: DB-50426. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-425-1801?: The FSCG of the NSN 3110-00-425-1801 is 3110

Does the NSN 3110-00-425-1801 have a Schedule B code assigned?: Yes, the Schedule B code is 8482400000

Does NSN 3110-00-425-1801 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-425-1801 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-425-1801 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.