What is the FSCG of the NSN 3110-00-198-1975?

The FSCG of the NSN 3110-00-198-1975 is 3110

Does the NSN 3110-00-198-1975 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-198-1975 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-198-1975 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-00-198-1975 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-198-1975 was assigned to the Federal Catalog?

It was assigned 64 years ago, on Sun, Jan 1, 1961

FF-B-171/10J06A2D | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: FF-B-171/10J06A2D. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: FF-B-171/10J06A2D
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-198-1975
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 01/01/1961

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

30.00 millimeters nominal bore diameter, straight bore shape, standard internal fit-up designation, contact bearing seal type, radial load direction

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-198-1975 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bearing Seal Type: contact
Bore Diameter: 30.00 millimeters nominal
Bore Shape: straight
Internal Fit-Up Designation: standard
Load Direction: radial
Lubrication Material Document And Classification: mil-g-18709 mil spec single material response
Lubrication Material: grease
Overall Outside Diameter: 72.00 millimeters nominal
Overall Width: 1.1875 inches nominal
Material: rubber synthetic seal
Material: steel ball
Material: steel inner ring
Material: steel outer ring
Material: steel retainer
Retainer Fabrication Method: pressed
Seal Quantity: 2
Special Features: w/o grease plug
Standard Tolerance Designation: abec no.1
Style Designator: non-loading groove, non-separable cartridge type
Surface Finish: ground

Replaces

The NSN 3110-00-198-1975 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3110-00-078-7065	No Name Available	01/29/1969
3110-00-844-0755	No Name Available	10/18/1967

Frequently Asked Questions

Find quick answers to common questions about bearing: FF-B-171/10J06A2D. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-198-1975?: The FSCG of the NSN 3110-00-198-1975 is 3110

Does the NSN 3110-00-198-1975 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-198-1975 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-198-1975 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-198-1975 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.