What is the FSCG of the NSN 3110-00-184-9113?

The FSCG of the NSN 3110-00-184-9113 is 3110

Does the NSN 3110-00-184-9113 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-184-9113 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-184-9113 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-184-9113 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-184-9113 was assigned to the Federal Catalog?

It was assigned 53 years ago, on Fri, Dec 17, 1971

SR3FMC7P811 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: SR3FMC7P811. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: SR3FMC7P811
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-184-9113
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 12/17/1971

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

0.5650 inches nominal flange outside diameter, straight bore shape, 0.1875 inches nominal bore diameter, c44 calibration designator, 0.0420 inches nominal flange width

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-184-9113 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bore Diameter: 0.1875 inches nominal
Bore Shape: straight
Calibration Designator: c44
Flange Outside Diameter: 0.5650 inches nominal
Flange Width: 0.0420 inches nominal
Internal Clearance: 0.0008 inches minimum radial and 0.0024 inches maximum radial
Load Direction: angular
Lubrication Material Document And Classification: mil-g-81322 mil spec 1st material response or xrl743a,fscm 77988 mfr ref 2nd material response
Lubrication Material: grease or oil
Outer Ring Outside Diameter: 0.5000 inches nominal
Overall Width: 0.1562 inches nominal
Material: plastic phenolic retainer
Material: steel corrosion resisting ball
Material: steel corrosion resisting inner ring
Material: steel corrosion resisting outer ring
Retainer Fabrication Method: molded
Special Features: pack bearing 10 percent full of specified grease also ball contact angle 14 deg min to 25 deg max
Standard Tolerance Designation: abec no.7
Style Designator: shouldered inner ring, separable
Surface Finish: ground

Frequently Asked Questions

Find quick answers to common questions about bearing: SR3FMC7P811. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-184-9113?: The FSCG of the NSN 3110-00-184-9113 is 3110

Does the NSN 3110-00-184-9113 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-184-9113 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-184-9113 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-184-9113 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.