What is the FSCG of the NSN 3110-00-157-6105?

The FSCG of the NSN 3110-00-157-6105 is 3110

Does the NSN 3110-00-157-6105 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-157-6105 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-157-6105 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-157-6105 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-157-6105 was assigned to the Federal Catalog?

It was assigned 64 years ago, on Sun, Jan 1, 1961

CB1086C | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: CB1086C. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: CB1086C
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-157-6105
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 01/01/1961

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

2.0600 inches minimum and 2.0650 inches maximum flange outside diameter, 25.0 degrees nominal contact angle, 1.3750 inches minimum and 1.3830 inches maximum bore diameter, 1.2500 inches nominal effective length, straight bore shape

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-157-6105 . Find dimensions, materials, tolerances, performance characteristics, etc.

Effective Length: 1.2500 inches nominal
Bore Diameter: 1.3750 inches minimum and 1.3830 inches maximum
Bore Shape: straight
Contact Angle: 25.0 degrees nominal
Flange Outside Diameter: 2.0600 inches minimum and 2.0650 inches maximum
Groove Diameter: 1.6200 inches minimum and 1.6230 inches maximum
Groove Width: 0.5100 inches minimum and 0.5150 inches maximum
Load Direction: angular
Lubrication Material: grease
Lubrication Material Document And Classification: dod-g-24508 mil spec single material response
Overall Length: 1.8750 inches nominal
Overall Outside Diameter: 2.8125 inches nominal
Material: steel overall
Retainer Fabrication Method: pressed
Special Features: banded od
Style Designator: clutch release, integral inner ring w/fork groove, slider type
Surface Finish: ground

Frequently Asked Questions

Find quick answers to common questions about bearing: CB1086C. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-157-6105?: The FSCG of the NSN 3110-00-157-6105 is 3110

Does the NSN 3110-00-157-6105 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-157-6105 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-157-6105 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-157-6105 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.