What is the FSCG of the NSN 3110-00-115-9851?

The FSCG of the NSN 3110-00-115-9851 is 3110

Does the NSN 3110-00-115-9851 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-115-9851 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-115-9851 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-115-9851 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-115-9851 was assigned to the Federal Catalog?

It was assigned 56 years ago, on Mon, Sep 23, 1968

FC1 1/4 RFM-8 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: FC1 1/4 RFM-8. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: FC1 1/4 RFM-8
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-115-9851
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 09/23/1968

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

radial load direction, contact bearing seal type, 0.1084 inches minimum and 0.1094 inches maximum inner ring width, straight bore shape, 40.5 degrees nominal contact angle

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-115-9851 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bearing Seal Type: contact
Bore Shape: straight
Contact Angle: 40.5 degrees nominal
Inner Ring Width: 0.1084 inches minimum and 0.1094 inches maximum
Load Direction: radial
Lubrication Material: oil lubricating
Outer Ring Outside Diameter: 0.6258 inches minimum and 0.6260 inches maximum
Outer Ring Width: 0.1370 inches minimum and 0.1430 inches maximum
Overall Outside Diameter: 0.6750 inches nominal
Material Document And Classification: mil-p-79 mil spec single material response retainer
Material: plastic polytetrafluoroethylene seal
Material: plastic retainer
Material: steel comp e52100 ball
Material: steel comp e52100 inner race
Material: steel comp e52100 outer race
Seal Quantity: 1
Shield Quantity: 1
Standard Tolerance Designation: abec no.7
Surface Finish: ground

Frequently Asked Questions

Find quick answers to common questions about bearing: FC1 1/4 RFM-8. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-115-9851?: The FSCG of the NSN 3110-00-115-9851 is 3110

Does the NSN 3110-00-115-9851 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-115-9851 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-115-9851 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-115-9851 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.