What is the FSCG of the NSN 3110-00-020-3118?

The FSCG of the NSN 3110-00-020-3118 is 3110

Does the NSN 3110-00-020-3118 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-020-3118 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-020-3118 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-020-3118 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-020-3118 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Tue, Oct 17, 1972

KB025XP0 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: KB025XP0. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: KB025XP0
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-020-3118
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 10/17/1972

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

standard internal fit-up designation, 3.1245 inches minimum and 3.1250 inches maximum overall outside diameter, 2.4994 inches minimum and 2.5000 inches maximum bore diameter, radial load direction, straight bore shape

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-020-3118 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bore Diameter: 2.4994 inches minimum and 2.5000 inches maximum
Bore Shape: straight
Internal Fit-Up Designation: standard
Load Direction: radial
Overall Outside Diameter: 3.1245 inches minimum and 3.1250 inches maximum
Overall Width: 0.3075 inches minimum and 0.3125 inches maximum
Material Document And Classification: 66 fed std single material response ball
Material Document And Classification: 66 fed std single material response inner ring
Material Document And Classification: 66 fed std single material response outer ring
Material: copper alloy retainer
Material: steel comp e52100 ball
Material: steel comp e52100 inner ring
Material: steel comp e52100 outer ring
Reference Number Differentiating Characteristics: as differentiated by material which must conform to ships parts control center special quality control provisions
Retainer Fabrication Method: pressed
Special Test Features: special quality control tezting
Standard Tolerance Designation: abec no.1
Style Designator: 4 point ball contact, solid inner and outer rings, non-separable
Surface Finish: ground
Test Data Document: "81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Frequently Asked Questions

Find quick answers to common questions about bearing: KB025XP0. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-020-3118?: The FSCG of the NSN 3110-00-020-3118 is 3110

Does the NSN 3110-00-020-3118 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-020-3118 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-020-3118 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-020-3118 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.