MS14101-9P

Ολοκληρωμένες προδιαγραφές και λεπτομέρειες εφαρμογής για: MS14101-9P Self-Aligning Plain Bearing.

Περίληψη

Εξερευνήστε λεπτομερείς συνοπτικές πληροφορίες για το ρουλεμάν: MS14101-9P. Περιλαμβάνει NSN, ομάδα ταξινόμησης και κωδικούς αναγνώρισης για την υποστήριξη της προμήθειας, της συμμόρφωσης και της ακριβούς παρακολούθησης εξαρτημάτων.

Αριθμός εξαρτήματος
MS14101-9P
Ομοσπονδιακή Ταξινόμηση Εφοδιασμού
3120 Μη τοποθετημένα απλά ρουλεμάν
(NSN) Εθνικός Αριθμός Αποθέματος
3120-01-707-2187
Κωδικός ονόματος αντικειμένου
13208
Οδηγός Ομοσπονδιακής Αναγνώρισης Αντικειμένων
A045A0
Ημερομηνία ανάθεσης
01/23/2023

Αποσπώμενο συγκρότημα μέσα ή πάνω στο οποίο κινείται ένας στροφέας, ένα έμβολο, ένας στροφέας ή κάτι παρόμοιο. Χρησιμοποιείται για τη μεταφορά φορτίου και για τη μείωση της τριβής ολίσθησης. Δεν χρησιμοποιεί κυλιόμενα στοιχεία. Το αντικείμενο αποτελείται από μια τρυπημένη σφαίρα ακριβείας (ή σφαιρικό απλό ρουλεμάν) γύρω από την οποία είναι τοποθετημένος ένας εξωτερικός δακτύλιος. Το συγκρότημα μπορεί να είναι είτε διαχωρίσιμο είτε μη διαχωρίσιμο. Εξαιρούνται: ρουλεμάν, απλό, άκρο ράβδου και ρουλεμάν, απλό, σφαιρικό.

55.0 rockwell c minimum and 62.0 rockwell c maximum inner member hardness rating, self-lubricating liner race liner lubrication feature, 28.0 rockwell c minimum and 37.0 rockwell c maximum outer race member hardness rating, 0.560 inches minimum and 0.562 inches maximum inner member width, 0.5620 inches minimum and 0.5625 inches maximum bore diameter

Φύλλο δεδομένων

Παρακάτω παρατίθενται οι αναλυτικές τεχνικές προδιαγραφές για τα ρουλεμάν: 3120-01-707-2187 . Βρείτε διαστάσεις, υλικά, ανοχές, χαρακτηριστικά απόδοσης κ.λπ.

Διάμετρος οπής
0.5620 inches minimum and 0.5625 inches maximum
Βαθμολογία σκληρότητας
55.0 rockwell c minimum and 62.0 rockwell c maximum inner member
Βαθμολογία σκληρότητας
28.0 rockwell c minimum and 37.0 rockwell c maximum outer race member
Πλάτος εσωτερικού μέλους
0.560 inches minimum and 0.562 inches maximum
Χαρακτηριστικό λίπανσης
self-lubricating liner race liner
Όνομα εξαρτήματος που εκχωρήθηκε από τον ελεγκτικό φορέα
bearing, plain, self-lubricating, self-aligning, low speed, narrow, grooved race, - 65 to + 325 f
Υλικό Έγγραφο και Ταξινόμηση
ams5630 international std/spec all material responses or ams5880 international std/spec all material responses or ams5618 international std/spec all material responses inner member
Υλικό Έγγραφο και Ταξινόμηση
ams5643 international std/spec all material responses outer race member
Υλικό
plastic polytetrafluoroethylene race liner
Υλικό
steel comp 440c inner member
Υλικό
steel corrosion resisting outer race member
Εξωτερική διάμετρος εξωτερικού μέλους
1.0932 inches minimum and 1.0937 inches maximum
Πλάτος εξωτερικού μέλους
0.432 inches minimum and 0.442 inches maximum
Ειδικά Χαρακτηριστικά
absence of letter c indicates 440c ball material. absence of letter a = tested to 25000 cycles. p = zinc-nickel or cadmium plating. material - ball: 440c (ams5630, ams5880, or ams5618). race: 17-4ph cres per ams5643. liner: ptfe shall be included in the liner. harness rating is before swaging. finish: race: plating, when specified, shall be zinc-nickel plating per ams2417, type 2, grade b or cadmium plating per ams-qq-p-416, type ii, class 2. plating shall be on the outside diameter surface and on the flats between the outside diameter and the v-grooves. the plating runout shall occur either in the v-grooves or on the side face areas between the v-grooves and the ball. ball: passivate per ams2700, method 1 (nitric acid) or method 2 (citric acid), or astm a967. citric 1, citric 2, and citric 3 are acceptable. (ams2700, method 1, type 8 is prohibited on bearings manufactured with 440c after june 1, 2018).
Στατική ακτινική βαθμολογία φορτίου
23200 pounds
Προσδιοριστής στυλ
with insert and/or liner with staking groove
Έγγραφο και ταξινόμηση επιφανειακής επεξεργασίας
ams2417, type 2, grade b international std/spec all treatment responses or ams-qq-p-416, type ii, class 2 international std/spec all treatment responses inner member
Έγγραφο και ταξινόμηση επιφανειακής επεξεργασίας
ams2700, method 1 (nitric acid) or method 2 (citric acid) international std/spec all treatment responses or astm a967. citric 1, citric 2, and citric 3 international std/spec all treatment responses outer race member
Επιφανειακή επεξεργασία
cadmium or zinc and nickel alloy inner member
Επιφανειακή επεξεργασία
passivate outer race member

Συχνές ερωτήσεις

Βρείτε γρήγορες απαντήσεις σε συνήθεις ερωτήσεις σχετικά με τα ρουλεμάν: MS14101-9P. Εξερευνήστε τις τεχνικές προδιαγραφές, τις συμβουλές εγκατάστασης, τις οδηγίες συντήρησης, τις κανονιστικές απαιτήσεις και τις συμβουλές αντιμετώπισης προβλημάτων.

What is the FSCG of the NSN 3120-01-707-2187?
The FSCG of the NSN 3120-01-707-2187 is 3120
Does the NSN 3120-01-707-2187 have a Schedule B code assigned?
Yes, the Schedule B code is 8482300040
Does NSN 3120-01-707-2187 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-707-2187 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-707-2187 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-707-2187 was assigned to the Federal Catalog?
It was assigned πριν 2 χρόνια, on Mon, Jan 23, 2023

Τιμή & Διαθεσιμότητα

Συμπληρώστε τη φόρμα για να λάβετε λεπτομέρειες σχετικά με την τιμή και τη διαθεσιμότητα του ρουλεμάν: MS14101-9P

Δημοφιλή Ρουλεμάν

Περιηγηθείτε στην επιλογή μας από ρουλεμάν υψηλής ζήτησης και απόδοσης:

205156
3120-01-201-8726
Sleeve Bushing
205162
3120-01-508-8110
Sleeve Bearing Half
20517
3120-00-071-6193
Linear-Rotary Motion Roller
205172
3120-01-508-8131
Sleeve Bearing Half
205180
3120-01-043-4251
Sleeve Bearing
205185
3110-01-271-8269
Thrust Roller Bearing
2051955
3120-00-517-8412
Sleeve Bushing
2051979
3110-00-156-1858
Thrust Ball Bearing
2051P1
3110-00-107-9889
Annular Ball Bearing
2051ST
3110-01-513-4467
Tapered Roller Bearing Cone
2052
3110-00-089-7537
Lower Clutc Bearing
205206
3110-00-156-4844
Annular Ball Bearing
2052159
3120-00-964-3587
Sleeve Bushing
205220
3120-01-592-1279
Sleeve Bearing
205230
3120-01-043-4250
Sleeve Bushing