MS14101-14P

Ολοκληρωμένες προδιαγραφές και λεπτομέρειες εφαρμογής για: MS14101-14P Self-Aligning Plain Bearing.

Περίληψη

Εξερευνήστε λεπτομερείς συνοπτικές πληροφορίες για το ρουλεμάν: MS14101-14P. Περιλαμβάνει NSN, ομάδα ταξινόμησης και κωδικούς αναγνώρισης για την υποστήριξη της προμήθειας, της συμμόρφωσης και της ακριβούς παρακολούθησης εξαρτημάτων.

Αριθμός εξαρτήματος
MS14101-14P
Ομοσπονδιακή Ταξινόμηση Εφοδιασμού
3120 Μη τοποθετημένα απλά ρουλεμάν
(NSN) Εθνικός Αριθμός Αποθέματος
3120-01-707-2184
Κωδικός ονόματος αντικειμένου
13208
Οδηγός Ομοσπονδιακής Αναγνώρισης Αντικειμένων
A045A0
Ημερομηνία ανάθεσης
01/23/2023

Αποσπώμενο συγκρότημα μέσα ή πάνω στο οποίο κινείται ένας στροφέας, ένα έμβολο, ένας στροφέας ή κάτι παρόμοιο. Χρησιμοποιείται για τη μεταφορά φορτίου και για τη μείωση της τριβής ολίσθησης. Δεν χρησιμοποιεί κυλιόμενα στοιχεία. Το αντικείμενο αποτελείται από μια τρυπημένη σφαίρα ακριβείας (ή σφαιρικό απλό ρουλεμάν) γύρω από την οποία είναι τοποθετημένος ένας εξωτερικός δακτύλιος. Το συγκρότημα μπορεί να είναι είτε διαχωρίσιμο είτε μη διαχωρίσιμο. Εξαιρούνται: ρουλεμάν, απλό, άκρο ράβδου και ρουλεμάν, απλό, σφαιρικό.

self-lubricating liner race liner lubrication feature, 28.0 rockwell c minimum and 37.0 rockwell c maximum outer race member hardness rating, 0.8745 inches minimum and 0.8750 inches maximum bore diameter, 0.873 inches minimum and 0.875 inches maximum inner member width, 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member hardness rating

Φύλλο δεδομένων

Παρακάτω παρατίθενται οι αναλυτικές τεχνικές προδιαγραφές για τα ρουλεμάν: 3120-01-707-2184 . Βρείτε διαστάσεις, υλικά, ανοχές, χαρακτηριστικά απόδοσης κ.λπ.

Διάμετρος οπής
0.8745 inches minimum and 0.8750 inches maximum
Βαθμολογία σκληρότητας
55.0 rockwell c minimum and 62.0 rockwell c maximum inner member
Βαθμολογία σκληρότητας
28.0 rockwell c minimum and 37.0 rockwell c maximum outer race member
Πλάτος εσωτερικού μέλους
0.873 inches minimum and 0.875 inches maximum
Χαρακτηριστικό λίπανσης
self-lubricating liner race liner
Όνομα εξαρτήματος που εκχωρήθηκε από τον ελεγκτικό φορέα
bearing, plain, self-lubricating, self-aligning, low speed, narrow, grooved race, - 65 to + 325 f
Υλικό Έγγραφο και Ταξινόμηση
ams5630 international std/spec all material responses or ams5880 international std/spec all material responses or ams5618 international std/spec all material responses inner member
Υλικό Έγγραφο και Ταξινόμηση
ams5643 international std/spec all material responses outer race member
Υλικό
plastic polytetrafluoroethylene race liner
Υλικό
steel comp 440c inner member
Υλικό
steel corrosion resisting outer race member
Εξωτερική διάμετρος εξωτερικού μέλους
1.5620 inches minimum and 1.5625 inches maximum
Πλάτος εξωτερικού μέλους
0.698 inches minimum and 0.708 inches maximum
Ειδικά Χαρακτηριστικά
absence of letter c indicates 440c ball material. absence of letter a = tested to 25000 cycles. p = zinc-nickel or cadmium plating. material - ball: 440c (ams5630, ams5880, or ams5618). race: 17-4ph cres per ams5643. liner: ptfe shall be included in the liner. harness rating is before swaging. finish: race: plating, when specified, shall be zinc-nickel plating per ams2417, type 2, grade b or cadmium plating per ams-qq-p-416, type ii, class 2. plating shall be on the outside diameter surface and on the flats between the outside diameter and the v-grooves. the plating runout shall occur either in the v-grooves or on the side face areas between the v-grooves and the ball. ball: passivate per ams2700, method 1 (nitric acid) or method 2 (citric acid), or astm a967. citric 1, citric 2, and citric 3 are acceptable. (ams2700, method 1, type 8 is prohibited on bearings manufactured with 440c after june 1, 2018).
Στατική ακτινική βαθμολογία φορτίου
62200 pounds
Προσδιοριστής στυλ
with insert and/or liner with staking groove
Έγγραφο και ταξινόμηση επιφανειακής επεξεργασίας
ams2417, type 2, grade b international std/spec all treatment responses or ams-qq-p-416, type ii, class 2 international std/spec all treatment responses inner member
Έγγραφο και ταξινόμηση επιφανειακής επεξεργασίας
ams2700, method 1 (nitric acid) or method 2 (citric acid) international std/spec all treatment responses or astm a967. citric 1, citric 2, and citric 3 international std/spec all treatment responses outer race member
Επιφανειακή επεξεργασία
cadmium or zinc and nickel alloy inner member
Επιφανειακή επεξεργασία
passivate outer race member

Συχνές ερωτήσεις

Βρείτε γρήγορες απαντήσεις σε συνήθεις ερωτήσεις σχετικά με τα ρουλεμάν: MS14101-14P. Εξερευνήστε τις τεχνικές προδιαγραφές, τις συμβουλές εγκατάστασης, τις οδηγίες συντήρησης, τις κανονιστικές απαιτήσεις και τις συμβουλές αντιμετώπισης προβλημάτων.

What is the FSCG of the NSN 3120-01-707-2184?
The FSCG of the NSN 3120-01-707-2184 is 3120
Does the NSN 3120-01-707-2184 have a Schedule B code assigned?
Yes, the Schedule B code is 8482300040
Does NSN 3120-01-707-2184 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-707-2184 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-707-2184 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-707-2184 was assigned to the Federal Catalog?
It was assigned πριν 2 χρόνια, on Mon, Jan 23, 2023

Τιμή & Διαθεσιμότητα

Συμπληρώστε τη φόρμα για να λάβετε λεπτομέρειες σχετικά με την τιμή και τη διαθεσιμότητα του ρουλεμάν: MS14101-14P

Δημοφιλή Ρουλεμάν

Περιηγηθείτε στην επιλογή μας από ρουλεμάν υψηλής ζήτησης και απόδοσης:

A47257
3120-00-828-6852
Sleeve Bushing
A47261
3120-01-083-9677
Sleeve Bushing
A4740
3110-00-967-7974
Tapered Roller Bearing
A4741
3110-00-156-7901
Annular Ball Bearing
A4742R
3110-00-100-6162
Bearing Ball
A47578
3110-01-105-1933
Needle Roller Bearing
A47579
3110-01-105-1210
Annular Ball Bearing
A47633
3120-01-085-3039
Sleeve Bearing
A47666
3110-01-099-4888
Bearing
A477
3110-00-157-2010
Annular Ball Bearing
A47842
3120-01-101-5089
Sleeve Bearing
A4788-80-03
3120-00-413-0168
Sleeve Bearing
A4796
3110-00-156-7901
Annular Ball Bearing
A48063
3110-01-133-2250
Bearing Ball
A4809164
3120-01-453-2303
Sleeve Bushing