MS21241-04C009

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: MS21241-04C009 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: MS21241-04C009. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
MS21241-04C009
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-354-8267
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
03/06/1992

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

0.3755 inches minimum and 0.3760 inches maximum body outside diameter, square left flange outside right corner corner shape, 0.2505 inches minimum and 0.2515 inches maximum body inside diameter, square outside left corner corner shape, square inside left corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-354-8267 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.2505 inches minimum and 0.2515 inches maximum
القطر الخارجي للجسم
0.3755 inches minimum and 0.3760 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
0.7300 inches minimum and 0.7500 inches maximum
عرض الشفة
0.0575 inches minimum and 0.0625 inches maximum
الطول الإجمالي
0.3287 inches minimum and 0.3437 inches maximum
وثيقة المواد والتصنيف
ams 5643 assn std single material response outer layer
مادة
plastic polytetrafluoroethylene inner layer
مادة
steel comp 630 outer layer
الميزات الخاصة
plastic liner bonded to left end surface of flange
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
125.0 microinches inside diameter surface of body
تشطيب السطح
125.0 microinches outside diameter surface of flange
تشطيب السطح
125.0 microinches left end surface of body and flange
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
125.0 microinches right end surface of left flange
تشطيب السطح
63.0 microinches outside diameter surface of body

يستبدل

The NSN 3120-01-354-8267 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-151-5189 No Name Available 03/15/2018

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: MS21241-04C009. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-354-8267?
The FSCG of the NSN 3120-01-354-8267 is 3120
Does the NSN 3120-01-354-8267 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-354-8267 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-354-8267 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-354-8267 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-354-8267 was assigned to the Federal Catalog?
It was assigned منذ 33 سنة, on Fri, Mar 6, 1992

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: MS21241-04C009

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

C631-4-3
3120-00-239-7684
Rod End Plain Bearing
C631-4-7
3120-01-077-6430
Rod End Plain Bearing
C631-4-8
3120-00-998-5054
Rod End Plain Bearing
C631-4LH
3120-00-998-5053
Rod End Plain Bearing
C632-8LH
3120-01-166-6164
Rod End Plain Bearing
C63293-10
3110-00-554-6101
Annular Ball Bearing
C633-3
3120-01-488-3729
Rod End Plain Bearing
C633-4
3120-00-998-5052
Rod End Plain Bearing
C633-4-1
3110-01-051-1627
Rod End Ball Bearing
C633-4-2
3120-00-849-6971
Rod End Plain Bearing
C633-5
3120-00-540-2374
Rod End Plain Bearing
C6331-2
3110-00-117-0186
Thrust Ball Bearing
C63585
3110-00-144-8499
Annular Ball Bearing
C63586
3110-00-554-3238
Annular Ball Bearing
C63587
3110-00-554-5396
Annular Ball Bearing