AHJF11C(L1)008

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: AHJF11C(L1)008 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: AHJF11C(L1)008. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
AHJF11C(L1)008
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-335-7179
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
03/13/1991

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

0.8762 inches minimum and 0.8767 inches maximum body outside diameter, square inside left corner corner shape, square left flange outside right corner corner shape, 0.6880 inches minimum and 0.6890 inches maximum body inside diameter, square outside left corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-335-7179 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.6880 inches minimum and 0.6890 inches maximum
القطر الخارجي للجسم
0.8762 inches minimum and 0.8767 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
1.3550 inches minimum and 1.3750 inches maximum
عرض الشفة
0.0575 inches minimum and 0.0625 inches maximum
الطول الإجمالي
0.5625 inches nominal
وثيقة المواد والتصنيف
ams 5643 assn std single material response outer layer
مادة
plastic polytetrafluoroethylene inner layer
مادة
steel comp 630 outer layer
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
63.0 microinches outside diameter surface of body

يستبدل

The NSN 3120-01-335-7179 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-01-341-7548 No Name Available 09/01/1994

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: AHJF11C(L1)008. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-335-7179?
The FSCG of the NSN 3120-01-335-7179 is 3120
Does the NSN 3120-01-335-7179 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-335-7179 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-335-7179 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-335-7179 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-335-7179 was assigned to the Federal Catalog?
It was assigned منذ 34 سنة, on Wed, Mar 13, 1991

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: AHJF11C(L1)008

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

100730-01
3130-01-312-3865
Bearing Unit Housing
10073001
3130-01-312-3865
Bearing Unit Housing
100734
3110-00-796-4615
Thrust Ball Bearing
1007420
3110-01-279-2177
Annular Ball Bearing
1007461
3120-01-306-6600
Sleeve Bearing
1007462
3110-01-575-7570
Needle Bearing
10075
3110-00-554-5236
Annular Ball Bearing
10075-0430
3120-01-480-8578
Bearing
1007537
3110-01-279-2179
Annular Ball Bearing
1007578
3110-01-524-5166
Self-Aligning Roller Bearing
10076
3110-00-554-3275
Annular Ball Bearing
10076490
3120-01-564-4361
Sleeve Bearing
10076491
3120-01-051-2317
Sleeve Bearing
10077
3110-00-554-3232
Annular Ball Bearing
100770
3110-00-156-1897
Thrust Ball Bearing