M81934/1-7A012

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: M81934/1-7A012 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: M81934/1-7A012. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
M81934/1-7A012
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-198-7979
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
01/14/1985

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

0.3650 inches minimum and 0.3750 inches maximum overall length, 0.4380 inches minimum and 0.4390 inches maximum body inside diameter, square all corners corner shape, ams 5643 assn std single material response outer layer material document and classification, 0.5633 inches minimum and 0.5643 inches maximum body outside diameter

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-198-7979 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.4380 inches minimum and 0.4390 inches maximum
القطر الخارجي للجسم
0.5633 inches minimum and 0.5643 inches maximum
شكل الزاوية
square all corners
الطول الإجمالي
0.3650 inches minimum and 0.3750 inches maximum
وثيقة المواد والتصنيف
ams 5643 assn std single material response outer layer
مادة
plastic polytetrafluoroethylene inner layer
مادة
steel comp 630 outer layer
مُحدد الأسلوب
solid, plain, no outside flanges
تشطيب السطح
125.0 microinches inside diameter surface of body
تشطيب السطح
125.0 microinches left end surface of body
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
63.0 microinches outside diameter surface of body

يستبدل

The NSN 3120-01-198-7979 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-500-2276 No Name Available 07/01/1988

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: M81934/1-7A012. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-198-7979?
The FSCG of the NSN 3120-01-198-7979 is 3120
Does the NSN 3120-01-198-7979 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-198-7979 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-198-7979 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-198-7979 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-198-7979 was assigned to the Federal Catalog?
It was assigned منذ 40 سنة, on Mon, Jan 14, 1985

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: M81934/1-7A012

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

124692
3110-00-555-5326
Annular Ball Bearing
124696
3110-00-585-9430
Annular Ball Bearing
124697
3110-00-156-7887
Annular Ball Bearing
1246E525
3120-01-020-0808
Sleeve Bushing
1246F526
3120-01-020-0809
Sleeve Bushing
1246M
3120-00-339-5642
Sleeve Bearing Set
1246STEELBALLGRADE10
3110-00-236-2054
Bearing Ball
124701
3110-01-258-6075
Annular Ball Bearing
12470153-1
3110-01-480-5857
Bearing Turrett
124711
3110-00-156-7894
Annular Ball Bearing
124713
3110-00-156-7920
Annular Ball Bearing
12471505
3120-01-143-0454
Kit Bearing
12472201
3110-01-027-7930
Bearing Retainer
1247229
3110-01-473-4441
Bearing Retaining Plate
12472424
3130-01-521-1406
Bearing Unit Housing