REMS8ATC12-7

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: REMS8ATC12-7 Rod End Plain Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: REMS8ATC12-7. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
REMS8ATC12-7
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-163-5958
اسم العنصر الكود
13209
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
10/05/1983

مجموعة قابلة للفصل، تتحرك داخلها أو عليها، أو عليها دعامة، أو مفصل، أو محور، أو ما شابه. تُستخدم لحمل الأحمال وتقليل الاحتكاك الانزلاقي. لا تستخدم عناصر دوارة. الجزء الخارجي من المجموعة مُعدّل لتوفير ساق. الجزء الداخلي قد يكون محملًا كرويًا عاديًا أو محملًا كميًا. لا يشمل: المحمل العادي، الكروي، والمحمل العادي، ذاتي المحاذاة.

2.2975 inches minimum and 2.3400 inches maximum overall length, nomex,fscm 21335 mfr ref single material response race liner material document and classification, 1.8650 inches minimum and 1.8850 inches maximum bore center to shank end distance, 0.5880 inches minimum and 0.5930 inches maximum inner member width, 0.2495 inches minimum and 0.2500 inches maximum bore diameter

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-163-5958 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

قطر التجويف
0.2495 inches minimum and 0.2500 inches maximum
المسافة من مركز التجويف إلى نهاية الساق
1.8650 inches minimum and 1.8850 inches maximum
عرض العضو الداخلي
0.5880 inches minimum and 0.5930 inches maximum
الطول الإجمالي
2.2975 inches minimum and 2.3400 inches maximum
وثيقة المواد والتصنيف
nomex,fscm 21335 mfr ref single material response race liner
مادة
plastic polytetrafluoroethylene race liner
مادة
steel comp 440c inner member
مادة
steel comp 410 outer ring
مادة
steel comp 4130 or steel comp 4340 rod end body
القطر الخارجي للعضو الخارجي
0.8650 inches minimum and 0.9100 inches maximum
عرض العضو الخارجي
0.3390 inches minimum and 0.3490 inches maximum
نمط الساق
externally threaded
طول خيط الساق
1.2500 inches minimum and 1.3400 inches maximum
الميزات الخاصة
nas 513 keyway in shank; integral shank not plated
تصنيف الحمل الشعاعي الثابت
7434 pounds
مُحدد الأسلوب
ball type
معالجة السطح
cadmium rod end body
فئة الخيط
3a
قطر الخيط
0.375 inches nominal
اتجاه الخيط
right-hand
كمية الخيوط لكل بوصة
24
مُعَيِّن سلسلة الخيوط
unf

يستبدل

The NSN 3120-01-163-5958 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-01-085-3336 No Name Available 10/01/1992

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: REMS8ATC12-7. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-163-5958?
The FSCG of the NSN 3120-01-163-5958 is 3120
Does the NSN 3120-01-163-5958 have a Schedule B code assigned?
Yes, the Schedule B code is 8483308055
Does NSN 3120-01-163-5958 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-163-5958 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-163-5958 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-163-5958 was assigned to the Federal Catalog?
It was assigned منذ 41 سنة, on Wed, Oct 5, 1983

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: REMS8ATC12-7

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

11592619
3120-00-008-5841
Sleeve Bushing
11592672
3130-00-463-4491
Bearing Unit Housing
11592678
3120-00-930-9411
Thrust Washer Bearing
11592681
3120-00-930-9413
Thrust Washer Bearing
11592682
3120-00-494-9529
Sleeve Bushing
11592684
3120-00-930-9414
Thrust Washer Bearing
11592874
3110-00-933-3110
Bearing Ball Retainer
11594031
3120-00-945-6995
Sleeve Bearing
11594041
3110-00-701-3836
Bearing Ball Retainer
11594111
3110-01-087-6988
Bearing Retaining Plate
11594173
3110-00-844-3887
Bearing Retaining Plate
11594881
3120-00-080-6658
Sleeve Bushing
11595674
3120-00-782-4148
Sleeve Bushing
11597-1
3120-01-379-8064
Linear-Rotary Motion Roller
11597-2
3120-01-378-7332
Linear-Rotary Motion Roller