810-2178000-1 ITEM 89

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: 810-2178000-1 ITEM 89 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: 810-2178000-1 ITEM 89. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
810-2178000-1 ITEM 89
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-099-1013
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
08/13/1980

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

3.5010 inches minimum and 3.5020 inches maximum body outside diameter, square left flange outside right corner corner shape, chamfered inside left corner corner shape, 3.2500 inches minimum and 3.2520 inches maximum body inside diameter, square left flange body corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-099-1013 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
3.2500 inches minimum and 3.2520 inches maximum
القطر الخارجي للجسم
3.5010 inches minimum and 3.5020 inches maximum
شكل الزاوية
chamfered inside left corner
شكل الزاوية
square left flange body corner
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
القطر الخارجي للشفة
3.8125 inches nominal
عرض الشفة
0.3730 inches minimum and 0.3750 inches maximum
نمط الإقامة في مواد التشحيم
grooved closed both ends
الطول الإجمالي
2.2500 inches nominal
مادة
copper alloy 632 overall
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
125.0 microinches right end surface of left flange
تشطيب السطح
32.0 microinches left end surface of body and flange
تشطيب السطح
32.0 microinches inside diameter surface of body
تشطيب السطح
63.0 microinches outside diameter surface of body
موقع الأخدود السطحي والكمية
4 internal

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 810-2178000-1 ITEM 89. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-099-1013?
The FSCG of the NSN 3120-01-099-1013 is 3120
Does the NSN 3120-01-099-1013 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-099-1013 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-099-1013 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-099-1013 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-099-1013 was assigned to the Federal Catalog?
It was assigned منذ 44 سنة, on Wed, Aug 13, 1980

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: 810-2178000-1 ITEM 89

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

164046-10
3110-00-156-5059
Annular Ball Bearing
164097
3120-01-241-1441
Sleeve Bushing
164099-3
3110-00-157-0300
Annular Ball Bearing
1640DC
3110-00-127-4659
Annular Ball Bearing
1640DS
3110-00-631-6509
Annular Ball Bearing
1640DSM24M
3110-00-631-6509
Annular Ball Bearing
1640DSTN
3110-00-631-6509
Annular Ball Bearing
1640N2
3110-00-278-6917
Tapered Roller Cone and Rollers
1640PL0138748
3110-00-100-3702
Tapered Roller Cone and Rollers
1641
3120-01-320-9953
Sleeve Bushing
164114-10
3110-00-554-5832
Annular Ball Bearing
16412
3110-00-293-9302
Annular Ball Bearing
16414
3120-00-795-5757
Rod End Plain Bearing
164167057
3120-01-340-8338
Sleeve Bushing
164167098
3120-01-175-0529
Sleeve Bushing