123-0209A016

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: 123-0209A016 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: 123-0209A016. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
123-0209A016
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-084-9241
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
10/26/1979

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

square inside left corner corner shape, 0.5630 inches minimum and 0.5640 inches maximum body inside diameter, 0.6887 inches minimum and 0.6897 inches maximum body outside diameter, square outside left corner corner shape, square left flange outside right corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-084-9241 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.5630 inches minimum and 0.5640 inches maximum
القطر الخارجي للجسم
0.6887 inches minimum and 0.6897 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
1.1050 inches minimum and 1.1250 inches maximum
عرض الشفة
0.0575 inches minimum and 0.0625 inches maximum
الطول الإجمالي
0.5475 inches minimum and 0.5625 inches maximum
مادة
aluminum alloy 2024 outer layer
مادة
plastic inner layer
الميزات الخاصة
plastic,polytetrafluoroethylene liner bonded to left surface of flange
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
125.0 microinches inside diameter surface of body
تشطيب السطح
125.0 microinches outside diameter surface of flange
تشطيب السطح
125.0 microinches left end surface of body and flange
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
125.0 microinches right end surface of left flange
تشطيب السطح
63.0 microinches outside diameter surface of body
وثيقة معالجة السطح والتصنيف
mil-a-8625 mil spec single treatment response outer layer
معالجة السطح
anodize outer layer

يستبدل

The NSN 3120-01-084-9241 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-316-7470 No Name Available 06/01/1991

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 123-0209A016. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-084-9241?
The FSCG of the NSN 3120-01-084-9241 is 3120
Does the NSN 3120-01-084-9241 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-084-9241 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-084-9241 contain precious materials?
Precious metal content is unknown
Does NSN 3120-01-084-9241 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-084-9241 was assigned to the Federal Catalog?
It was assigned منذ 45 سنة, on Fri, Oct 26, 1979

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: 123-0209A016

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

DAT72-90A1-506
3120-01-653-1954
Sleeve Bearing
DAT76-102A1-501
3110-00-522-8952
Airframe Roller Bearing
DAT76-102A1-507
3110-01-680-8772
Airframe Roller Bearing
DAX10872
3120-01-073-4272
Sleeve Bearing
DAX11006
3120-01-073-4108
Sleeve Bearing
DAX11197
3120-01-083-3096
Thrust Washer Bearing
DAX11198
3120-01-083-3097
Thrust Washer Bearing
DAX11199
3120-01-073-4274
Thrust Washer Bearing
DAX11259
3120-01-073-7881
Sleeve Bearing
DAX11346
3120-01-095-2424
Thrust Washer Bearing
DAX11348
3110-01-080-9566
Bearing Roller
DAX11402
3120-01-083-3095
Thrust Washer Bearing
DAX11586
3130-01-073-0114
Bearing Unit Housing
DAX12002
3120-01-303-7215
Thrust Washer Bearing
DAX12073
3130-01-073-4308
Bearing Unit Housing