709-4684861 ITEM 19

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: 709-4684861 ITEM 19 Sleeve Bushing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: 709-4684861 ITEM 19. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
709-4684861 ITEM 19
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-069-3466
اسم العنصر الكود
13206
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
12/14/1978

قطعة أنبوبية الشكل غير ملولبة، مزودة أو بدون شفة في أحد طرفيها، مصممة لإدخالها في ثقب لتقليل القطر الداخلي للثقب وحماية هيكل الجسم المحيط من التلف الناتج عن الإجهاد أو الانفعال أو الاهتزاز. يجب أن يتجاوز الطول الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم. تشمل القطع المقسمة إلى جزأين أو أكثر، بما في ذلك محيط المحمل بزاوية 180 درجة (3.141 راديان) أو أقل. للقطع المصنوعة من المطاط، انظر: جلبة غير معدنية. انظر أيضًا: جلبة محمل؛ جلبة مدببة؛ فاصل جلبة؛ عازل جلبة؛ جلبة موصلة للكهرباء. لا يشمل: جلبة مثقاب؛ قالب تثبيت.

square left flange body corner corner shape, square left flange outside right corner corner shape, 0.8090 inches minimum and 0.8110 inches maximum body outside diameter, 0.6250 inches minimum and 0.6270 inches maximum body inside diameter, square outside left corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-069-3466 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.6250 inches minimum and 0.6270 inches maximum
القطر الخارجي للجسم
0.8090 inches minimum and 0.8110 inches maximum
شكل الزاوية
square left flange body corner
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
القطر الخارجي للشفة
1.1250 inches nominal
عرض الشفة
0.1250 inches nominal
الطول الإجمالي
1.1200 inches nominal
مادة
plastic overall
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
125.0 microinches outside diameter surface of body
تشطيب السطح
125.0 microinches outside diameter surface of flange
تشطيب السطح
125.0 microinches left end surface of body and flange
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
125.0 microinches right end surface of left flange
تشطيب السطح
63.0 microinches inside diameter surface of body

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 709-4684861 ITEM 19. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-069-3466?
The FSCG of the NSN 3120-01-069-3466 is 3120
Does the NSN 3120-01-069-3466 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997060
Does NSN 3120-01-069-3466 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-069-3466 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-069-3466 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-069-3466 was assigned to the Federal Catalog?
It was assigned منذ 46 سنة, on Thu, Dec 14, 1978

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: 709-4684861 ITEM 19

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

4M279-09002
3120-01-169-5634
Sleeve Bushing
4M279-09003
3120-01-395-3698
Sleeve Bushing
4M279-09005
3120-01-395-3699
Sleeve Bushing
4M279-10001
3120-01-169-5635
Sleeve Bushing
4M279-10002
3120-01-395-3702
Sleeve Bushing
4M282-1
3120-01-171-8745
Thrust Washer Bearing
4M286-112
3120-00-316-8120
Self-Aligning Plain Bearing
4M286-81
3120-00-316-8121
Self-Aligning Plain Bearing
4M2919
3130-00-514-8823
Bearing Assy
4M297-32A
3120-01-385-6272
Self-Aligning Plain Bearing
4M297-32T
3120-01-385-6272
Self-Aligning Plain Bearing
4M297-36
3120-01-462-2691
Self-Aligning Plain Bearing
4M297-36T
3120-01-462-2691
Self-Aligning Plain Bearing
4M297-78T
3120-01-476-1961
Self-Aligning Plain Bearing
4M297-95T
3120-01-481-6065
Self-Aligning Plain Bearing