123-2009C012

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: 123-2009C012 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: 123-2009C012. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
123-2009C012
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-043-0084
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
06/19/1977

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

0.5630 inches minimum and 0.5640 inches maximum body inside diameter, square outside left corner corner shape, square left flange outside right corner corner shape, 0.6887 inches minimum and 0.6892 inches maximum body outside diameter, square inside left corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-043-0084 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.5630 inches minimum and 0.5640 inches maximum
القطر الخارجي للجسم
0.6887 inches minimum and 0.6892 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
1.1050 inches minimum and 1.1250 inches maximum
عرض الشفة
0.0575 inches minimum and 0.0625 inches maximum
الطول الإجمالي
0.4225 inches minimum and 0.4375 inches maximum
وثيقة المواد والتصنيف
ams 5643 assn std single material response outer layer
مادة
plastic polytetrafluoroethylene inner layer
مادة
steel comp 630 outer layer
الميزات الخاصة
plastic liner bonded to left end surface of flange
مُحدد الأسلوب
solid, external flange one end

يستبدل

The NSN 3120-01-043-0084 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-006-4813 No Name Available 11/01/1979

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 123-2009C012. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-043-0084?
The FSCG of the NSN 3120-01-043-0084 is 3120
Does the NSN 3120-01-043-0084 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-043-0084 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-043-0084 contain precious materials?
Precious metal content is unknown
Does NSN 3120-01-043-0084 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-043-0084 was assigned to the Federal Catalog?
It was assigned منذ 48 سنة, on Sun, Jun 19, 1977

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: 123-2009C012

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

49567
3120-01-061-3023
Sleeve Bushing
4956A
3110-00-516-5289
Annular Ball Bearing
49577-49520
3110-01-026-2926
Tapered Roller Bearing
49580
3110-00-100-3616
Tapered Roller Cone and Rollers
495828
3120-00-869-7175
Sleeve Bushing
49585
3110-00-100-3617
Tapered Roller Cone and Rollers
49585-49520
3110-00-100-5377
Tapered Roller Bearing
49585-49522
3110-00-013-7743
Tapered Roller Bearing
4958935
3120-01-438-6998
Sleeve Bearing Half
4959
3120-00-148-2088
Sleeve Bushing
4959-1
3110-01-285-7764
Annular Ball Bearing
4959-6
3110-01-285-7765
Annular Ball Bearing
49591
3110-00-198-2170
Tapered Roller Bearing Cup
49592
3110-00-100-3537
Tapered Roller Cone and Rollers
49593
3110-01-161-9920
Tapered Roller Bearing Cone