134B219AAP4

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: 134B219AAP4 Sleeve Bushing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: 134B219AAP4. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
134B219AAP4
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-032-8323
اسم العنصر الكود
13206
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
12/23/1976

قطعة أنبوبية الشكل غير ملولبة، مزودة أو بدون شفة في أحد طرفيها، مصممة لإدخالها في ثقب لتقليل القطر الداخلي للثقب وحماية هيكل الجسم المحيط من التلف الناتج عن الإجهاد أو الانفعال أو الاهتزاز. يجب أن يتجاوز الطول الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم. تشمل القطع المقسمة إلى جزأين أو أكثر، بما في ذلك محيط المحمل بزاوية 180 درجة (3.141 راديان) أو أقل. للقطع المصنوعة من المطاط، انظر: جلبة غير معدنية. انظر أيضًا: جلبة محمل؛ جلبة مدببة؛ فاصل جلبة؛ عازل جلبة؛ جلبة موصلة للكهرباء. لا يشمل: جلبة مثقاب؛ قالب تثبيت.

square inside left corner corner shape, 0.7500 inches minimum and 0.7510 inches maximum body inside diameter, 1.4370 inches minimum and 1.4380 inches maximum body outside diameter, square outside left corner corner shape, square left flange outside right corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-032-8323 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.7500 inches minimum and 0.7510 inches maximum
القطر الخارجي للجسم
1.4370 inches minimum and 1.4380 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
1.7460 inches minimum and 1.7480 inches maximum
عرض الشفة
0.6875 inches nominal
نمط الإقامة في مواد التشحيم
grooved circular
الطول الإجمالي
3.5625 inches nominal
وثيقة المواد والتصنيف
mil-r-17131,ty mil-rfecrco mil spec single material response outside diameter surface of body
وثيقة المواد والتصنيف
mil-s-18410,class b,cond a mil spec single material response outer ring
مادة
iron alloy outside diameter surface of body
مادة
steel outer ring
الميزات الخاصة
left end of bore counterbored 0.8125 dia,0.1875 deep,right end of body od relieved to 1.2500 dia,0.2500 long
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
125.0 microinches left end surface of body and flange
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
63.0 microinches inside diameter surface of body
تشطيب السطح
63.0 microinches outside diameter surface of body
تشطيب السطح
63.0 microinches outside diameter surface of flange
تشطيب السطح
63.0 microinches right end surface of left flange
موقع الأخدود السطحي والكمية
5 internal and 1 external

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 134B219AAP4. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-032-8323?
The FSCG of the NSN 3120-01-032-8323 is 3120
Does the NSN 3120-01-032-8323 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997060
Does NSN 3120-01-032-8323 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-032-8323 contain precious materials?
Precious metal content is unknown
Does NSN 3120-01-032-8323 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-032-8323 was assigned to the Federal Catalog?
It was assigned منذ 48 سنة, on Thu, Dec 23, 1976

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: 134B219AAP4

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

6569599
3120-01-377-0272
Sleeve Bearing
65698
3110-01-185-5058
Clamp Bearing
65698-1
3110-01-185-5058
Clamp Bearing
65698-2
3110-01-185-5058
Clamp Bearing
656980
3110-01-199-6119
Thrust Roller Bearing
6569807
3120-01-469-8148
Sleeve Bushing
656D121-007
3120-01-286-2548
Sleeve Bearing
656D121PC1
3120-00-928-4147
Sleeve Bearing
656D122-007
3120-01-286-2549
Sleeve Bearing
656D122PC1
3120-00-928-4148
Sleeve Bearing
656D128PC10
3120-00-928-4151
Sleeve Bearing
656D128PC11
3120-00-928-4152
Sleeve Bearing
656D128PC8
3120-00-928-4149
Sleeve Bearing
656D128PC9
3120-00-928-4150
Sleeve Bearing
656D348-001
3120-01-285-4860
Sleeve Bearing