1843313-1

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: 1843313-1 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: 1843313-1. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
1843313-1
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-00-922-9426
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
01/09/1966

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

square inside left corner corner shape, 0.2500 inches minimum and 0.2505 inches maximum body inside diameter, square outside left corner corner shape, square left flange outside right corner corner shape, 0.3090 inches minimum and 0.3120 inches maximum body outside diameter

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-00-922-9426 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.2500 inches minimum and 0.2505 inches maximum
القطر الخارجي للجسم
0.3090 inches minimum and 0.3120 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
square right flange outside left corner
شكل الزاوية
undercut right flange body corner
شكل الزاوية
undercut left flange body corner
قطر فتحة الشفة الداخلية
0.2190 inches nominal
المسافة بين الطرف الأيسر للشفة الداخلية وخط الوسط
0.2090 inches nominal
عرض الشفة الداخلية
0.2300 inches minimum and 0.2320 inches maximum
القطر الخارجي للشفة اليسرى
0.3430 inches nominal
عرض الشفة اليسرى
0.0180 inches minimum and 0.0200 inches maximum
الطول الإجمالي
0.4160 inches minimum and 0.4200 inches maximum
مادة
plastic overall
القطر الخارجي للشفة اليمنى
0.3430 inches nominal
عرض الشفة اليمنى
0.0180 inches minimum and 0.0200 inches maximum
مُحدد الأسلوب
solid, external flanges both ends, interior flange(s) not located at either end

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 1843313-1. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-00-922-9426?
The FSCG of the NSN 3120-00-922-9426 is 3120
Does the NSN 3120-00-922-9426 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-00-922-9426 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-00-922-9426 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-00-922-9426 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-00-922-9426 was assigned to the Federal Catalog?
It was assigned منذ 59 سنة, on Sun, Jan 9, 1966

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: 1843313-1

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

0056166-2
3120-00-972-8455
Sleeve Bushing
005637K
3120-01-329-2084
Me Bearing Replacement Parts Kit
0056796
3120-01-308-5007
Sleeve Bushing
0056864
3110-00-198-2142
Inner Bearing Ring
0056864-2
3110-00-198-2142
Inner Bearing Ring
0056994
3110-01-308-5769
Cylindrical Roller Bearing
0057004
3110-00-101-0826
Tapered Roller Cone and Rollers
0057004-4
3110-00-101-0826
Tapered Roller Cone and Rollers
0057005
3110-00-100-0570
Tapered Roller Bearing Cup
0057005-1
3110-00-100-0570
Tapered Roller Bearing Cup
0057006
3110-00-100-3568
Tapered Roller Cone and Rollers
0057006-9
3110-00-100-3568
Tapered Roller Cone and Rollers
00571.3026 + 00572.3027
3110-01-360-5906
Tapered Roller Bearing
0057281
3110-00-277-0653
Cylindrical Roller Bearing
0057281-8
3110-00-277-0653
Cylindrical Roller Bearing