GDEA6-209

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: GDEA6-209 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: GDEA6-209. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
GDEA6-209
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-00-237-6773
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
06/03/1973

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

0.5008 inches minimum and 0.5013 inches maximum body outside diameter, 0.3750 inches minimum and 0.3760 inches maximum body inside diameter, square all corners corner shape, 2.0850 inches minimum and 2.0950 inches maximum overall length, ww-t-700/3 fed spec single material response outer layer material document and classification

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-00-237-6773 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.3750 inches minimum and 0.3760 inches maximum
القطر الخارجي للجسم
0.5008 inches minimum and 0.5013 inches maximum
شكل الزاوية
square all corners
الطول الإجمالي
2.0850 inches minimum and 2.0950 inches maximum
وثيقة المواد والتصنيف
ww-t-700/3 fed spec single material response outer layer
مادة
aluminum alloy 2024 outer layer
مادة
plastic polytetrafluoroethylene inner layer
مُحدد الأسلوب
solid, plain, no outside flanges
تشطيب السطح
125.0 microinches left end surface of body
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
63.0 microinches outside diameter surface of body
وثيقة معالجة السطح والتصنيف
mil-a-8625 mil spec 1st treatment response or mil-c-5541 mil spec 2nd treatment response outside diameter surface of body
وثيقة معالجة السطح والتصنيف
mil-a-8625 mil spec 1st treatment response or mil-c-5541 mil spec 2nd treatment response right end surface of body
وثيقة معالجة السطح والتصنيف
mil-a-8625 mil spec 1st treatment response or mil-c-5541 mil spec 2nd treatment response left end surface of body
معالجة السطح
anodize or chromate left end surface of body
معالجة السطح
anodize or chromate outside diameter surface of body
معالجة السطح
anodize or chromate right end surface of body

يستبدل

The NSN 3120-00-237-6773 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-401-5064 No Name Available 09/01/1974

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: GDEA6-209. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-00-237-6773?
The FSCG of the NSN 3120-00-237-6773 is 3120
Does the NSN 3120-00-237-6773 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-00-237-6773 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-00-237-6773 contain precious materials?
Precious metal content is unknown
Does NSN 3120-00-237-6773 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-00-237-6773 was assigned to the Federal Catalog?
It was assigned منذ 52 سنة, on Sun, Jun 3, 1973

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: GDEA6-209

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

L698/11
3120-01-314-1884
Sleeve Bearing Blank
L698/12
3120-01-322-2897
Sleeve Bearing Set
L698/36
3120-01-314-1958
Sleeve Bearing
L698/99
3120-01-309-9772
Sleeve Bearing
L698/99-1
3120-01-314-8502
Sleeve Bearing
L6S2-5
3120-01-182-8940
Sleeve Bushing
L7-93233
3120-00-355-4436
Sleeve Bearing
L70379
3120-01-307-4296
Sleeve Bushing
L7078A
3120-01-183-4119
Self-Aligning Plain Bearing
L709-1
3110-00-144-8668
Annular Ball Bearing
L70N
3110-00-144-8570
Annular Ball Bearing
L713
3110-00-740-0975
Bearing Retaining Plate
L713010
3110-00-785-1785
Tapered Roller Bearing Cup
L713010*2-629
3110-01-391-8149
Tapered Roller Bearing Cup
L713049
3110-00-679-4181
Tapered Roller Cone and Rollers