- نوع المحاذاة
- rigid
- نوع ختم المحمل
- contact
- الميزات المقدمة
- lubrication hole and lubrication groove
- وثيقة وتصنيف مواد التشحيم
- mil-g-23827 mil spec single material response
- مادة التشحيم
- grease
- عرض الحلقة الخارجية
- 0.6200 inches minimum and 0.6250 inches maximum
- الطول الإجمالي
- 1.4050 inches nominal
- القطر الخارجي الكلي
- 1.1240 inches minimum and 1.1254 inches maximum
- وثيقة المواد والتصنيف
- ams 5630 assn std single material response outer ring
- وثيقة المواد والتصنيف
- ams 5630 assn std single material response roller
- وثيقة المواد والتصنيف
- ams 5630 assn std single material response washer
- وثيقة المواد والتصنيف
- ams 6440 assn std 1st material response and ams 6274 assn std 2nd material response stud
- وثيقة المواد والتصنيف
- l-p-410 fed spec single material response seal
- مادة
- plastic polyhexamethylene adipamide seal
- مادة
- steel comp 440c outer ring
- مادة
- steel comp 440c roller
- مادة
- steel comp 440c washer
- مادة
- steel comp e52100 or steel comp 8620 stud
- حجم الخيط الاسمي
- 0.6250 inches
- كمية الختم
- 2
- الميزات الخاصة
- hex hole 0.1875 min
- قطر البرغي
- 0.6250 inches minimum and 0.6264 inches maximum
- طول البرغي
- 0.7500 inches nominal
- مُحدد الأسلوب
- cam follower
- وثيقة معالجة السطح والتصنيف
- ams 2406 assn std single treatment response all external/exposed metal surfaces
- معالجة السطح
- chromium all external/exposed metal surfaces
- فئة الخيط
- 2a
- اتجاه الخيط
- right-hand
- طول الخيط
- 0.6250 inches nominal
- كمية الخيوط لكل بوصة
- 18
- مُعَيِّن سلسلة الخيوط
- unf