MVF4DDFS160

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: MVF4DDFS160 Annular Ball Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: MVF4DDFS160. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
MVF4DDFS160
تصنيف الإمدادات الفيدرالية
3110 محامل مضادة للاحتكاك غير مثبتة
(NSN) رقم المخزون الوطني
3110-00-902-9318
اسم العنصر الكود
00014
دليل تحديد العناصر الفيدرالية
A044A0
تاريخ التعيين
01/01/1960

جهاز أسطواني تدور فيه الحلقة الداخلية أو الخارجية على صف واحد أو صفين من الكرات المقواة التي تتدحرج بسهولة بين الحلقتين، مما يقلل الاحتكاك. للقطع ذات الأسطح المصقولة خصيصًا للتركيب المزدوج، انظر: محمل، كرة، مزدوج. لا يشمل: محمل، كرة، هيكل الطائرة.

0.2500 inches minimum and 0.2503 inches maximum bore diameter, 0.0420 inches nominal flange width, 0.6870 inches nominal flange outside diameter, supply class aoe; aircraft, (ac-130h, mc-130h, ec-130e, hc-130); spruance class dd (963); seawolf class ssn; ticonderoga class cg (47); oliver perry class ffg; sturgeon class ssn (637); los angeles class ssn (688); austin ship class lpd-4 amphibious transport docks; fms - knox class ff end item identification, straight bore shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3110-00-902-9318 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

قطر التجويف
0.2500 inches minimum and 0.2503 inches maximum
شكل التجويف
straight
تحديد العنصر النهائي
supply class aoe; aircraft, (ac-130h, mc-130h, ec-130e, hc-130); spruance class dd (963); seawolf class ssn; ticonderoga class cg (47); oliver perry class ffg; sturgeon class ssn (637); los angeles class ssn (688); austin ship class lpd-4 amphibious transport docks; fms - knox class ff
القطر الخارجي للشفة
0.6870 inches nominal
عرض الشفة
0.0420 inches nominal
عرض الحلقة الداخلية
0.2500 inches nominal
التخليص الداخلي
0.0002 inches minimum radial and 0.0005 inches maximum radial
اتجاه التحميل
radial
وثيقة وتصنيف مواد التشحيم
mil-g-23827 mil spec single material response
مادة التشحيم
grease
القطر الخارجي للحلقة الخارجية
0.6253 inches minimum and 0.6257 inches maximum
عرض الحلقة الخارجية
0.2260 inches nominal
مادة
steel corrosion resisting overall
طريقة تصنيع المثبت
pressed
كمية الدرع
2
مُحدد الأسلوب
non-loading groove, non-separable
تشطيب السطح
ground

يستبدل

The NSN 3110-00-902-9318 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3110-00-071-3818 No Name Available 07/01/1976
3110-00-293-8142 No Name Available 03/01/1990
3110-00-529-9839 No Name Available 05/01/1997
3110-00-542-1906 No Name Available 04/01/1986
3110-00-554-6182 No Name Available 06/01/1976
3110-00-601-9811 No Name Available 08/01/1985
3110-00-785-1787 No Name Available 07/01/1985
3110-00-937-1874 No Name Available 08/01/2007

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: MVF4DDFS160. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3110-00-902-9318?
The FSCG of the NSN 3110-00-902-9318 is 3110
Does the NSN 3110-00-902-9318 have a Schedule B code assigned?
Yes, the Schedule B code is 8482105028
Does NSN 3110-00-902-9318 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3110-00-902-9318 contain precious materials?
Item does not contain precious metal.
Does NSN 3110-00-902-9318 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3110-00-902-9318 was assigned to the Federal Catalog?
It was assigned منذ 65 سنة, on Fri, Jan 1, 1960

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: MVF4DDFS160

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

410307-6
3110-00-052-1499
Annular Ball Bearing
410307-8
3110-00-979-7835
Annular Ball Bearing
41031087
3110-00-722-1253
Tapered Roller Bearing
41031485
3110-01-167-0104
Assembly Bearing
41034-6
3110-00-489-8548
Guide Roller
410369
3120-00-312-2934
Sleeve Bearing
41036L
3120-01-469-1430
Self-Aligning Plain Bearing
410393-0001
3110-01-447-9150
Thrust Ball Bearing
410393-0002
3110-01-448-6589
Thrust Ball Bearing
410394
3120-01-355-8829
Sleeve Bearing
410394-0001
3120-01-238-6419
Sleeve Bearing
410394-1
3120-01-355-8829
Sleeve Bearing
41042-39245-13
3120-01-467-3713
Sleeve Bearing
41042-39245-14
3120-01-467-3712
Sleeve Bearing
41042-39245-15
3130-01-467-3719
Pillow Block Cap