What is the FSCG of the NSN 3110-00-179-7402?

The FSCG of the NSN 3110-00-179-7402 is 3110

Does the NSN 3110-00-179-7402 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105068

Does NSN 3110-00-179-7402 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-179-7402 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-00-179-7402 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-179-7402 was assigned to the Federal Catalog?

It was assigned منذ 56 سنة, on Mon, Apr 28, 1969

M79105PW2NGSRDUE8383 | Aerospace-Bearing

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: M79105PW2NGSRDUE8383. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة: M79105PW2NGSRDUE8383
تصنيف الإمدادات الفيدرالية: 3110 محامل مضادة للاحتكاك غير مثبتة
(NSN) رقم المخزون الوطني: 3110-00-179-7402
اسم العنصر الكود: 30213
دليل تحديد العناصر الفيدرالية: A044A0
تاريخ التعيين: 04/28/1969

محملان كرويان حلقان أحاديا الصف، مُختاران أبعاديًا ليكونا زوجًا أو مجموعة متطابقة. صُقلت أسطح الحلقات خصيصًا لإزاحات محددة تُنتج حملًا مسبقًا مُحددًا مسبقًا عند التركيب. قد يتضمن محمل تلامس زاوي أحادي الصف بأسطح مصقولة خصيصًا للتركيب المزدوج.

1.8501 inches minimum and 1.8504 inches maximum overall outside diameter, 0.0003 inches maximum axial internal clearance, angular load direction, 0.9841 inches minimum and 0.9843 inches maximum bore diameter, 0.9249 inches minimum and 0.9449 inches maximum overall width

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3110-00-179-7402 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

قطر التجويف: 0.9841 inches minimum and 0.9843 inches maximum
التخليص الداخلي: 0.0003 inches maximum axial
اتجاه التحميل: angular
القطر الخارجي الكلي: 1.8501 inches minimum and 1.8504 inches maximum
العرض الكلي: 0.9249 inches minimum and 0.9449 inches maximum
وثيقة المواد والتصنيف: unable to decode
مادة: unable to decode
طريقة تصنيع المثبت: machined
تعيين التسامح القياسي: abec no.3
مُحدد الأسلوب: counterbored outer rings, non-separable, face to face mounting
تشطيب السطح: ground
وثيقة بيانات الاختبار: "52676-a47162a7 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 52676-a47163a7 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 52676-a47168 1 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 21335-aps-33a specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 21335-aps-36a specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: M79105PW2NGSRDUE8383. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3110-00-179-7402?: The FSCG of the NSN 3110-00-179-7402 is 3110

Does the NSN 3110-00-179-7402 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105068

Does NSN 3110-00-179-7402 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-179-7402 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-179-7402 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.